Tait TP9100 Series P25 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 168

Tait TP9100 Series P25 Скачать руководство пользователя страница 17

For your safety 17

■

a label on the radio battery, showing IS information
and the FM diamond logo

.

IS radios and batteries must not be engraved or modified
in any way.

An IS radio must be serviced only by an agency certified
by both the approval authority and by Tait Limited.
Any unauthorized repair or substitution of parts
invalidates the intrinsic safety rating and the third party IS
approval. To have an IS radio serviced, return it to an
authorized Tait branch or subsidiary.

Intrinsically safe TP9100 radios and accessories are
approved by Factory Mutual Corporation (FM) to the
following ratings:

■

IS / I, II, III / 1 / CDEFG / T3C, Ta = 40 °C; IP54

■

NI / I / 2 / ABCD / T3C, Ta = 40 °C; IP54

TP9100 portable radios with the product code
“TPAxxx-xx

01

x” have FM IS approval.

Warning

Use only an IS-approved battery with an IS

radio, and do not charge the battery in a hazardous
location. An explosion could cause serious injury or death.

Use only IS-approved accessories with IS radios. For an
up-to-date list of FM-approved accessories, go to the Tait
website or contact your nearest Tait office.

Warning

IS certification applies only while the product is

used in accordance with these instructions.

Radio installation and operation in

vehicles

Warning

Keep the radio away from airbags and airbag

deployment areas. Do not install, charge, or place a radio
near such areas. An activated airbag can propel a
portable radio with sufficient force to cause serious injury
to vehicle occupants. An airbag may not perform to
specification if obstructed by a radio.

Warning

To avoid damage to existing wiring, airbags,

fuel tanks, fuel and brake lines, or battery cables, refer to

APPROVED

«
...
15
16
17
18
19
...
»

Содержание TP9100 Series P25









































































































































































Отзывы:

Нет отзывов