Tait TP8135 Скачать руководство пользователя страница 102

Страница: 102 / 120

102

The red LED lights up, and stays lit while the battery charges.
For a battery that is almost completely discharged, allow two
hours.

When charging is complete, the green LED

stays lit.

LED behavior

If there is a battery in the charger when power is supplied to the
charger, the LEDs behave as follows:

If the charger does not behave as expected:

■

Make sure the radio or battery is seated properly in the
charger.

■

Check that the charger is properly plugged in.

■

Check that the battery and charger contacts are clean. To
clean, wipe the contacts with a dry lint-free cloth to remove
any dirt, oil or grease.

LED

Meaning

briefly

The charger has been connected to a power supply.

steady

The battery is charging.

steady

Charging complete. Remove the battery, or leave it in
the charger.

steady

The battery temperature is outside the normal charg-
ing range. Charging will start or resume once the
temperature is within normal limits. No action is
required by you.
There is a fault. Contact your local regional Tait office.

Содержание TP8135

























































































































Результаты поиска

Содержание TP8135

Отзывы:

Похожие инструкции для TP8135

Бренды по названию

Популярные бренды

Tait TP8135, Руководство пользователя

Результаты поиска

Содержание TP8135

Отзывы:

Похожие инструкции для TP8135

Бренды по названию

Популярные бренды