background image

4

TMAA13 User’sGuide

Important safety information

Please read these warnings before using the TMAA13 power supply.

Warning: Safe operation

To reduce the risk of fire or electric shock, please adhere to these 
warnings:

Moisture: Do not expose this appliance to rain or moisture.

Cleaning: Unplug the power supply from the mains power outlet 
before cleaning. Switching off the power supply will not reduce 
this risk.

Ventilation: Place the power supply in an area that will allow air 
to flow freely around the unit to prevent overheating. Do not 
block or obstruct any of the ventilation openings on the unit.

Warning: Electrical connections

To reduce the risk of fire or electric shock, please adhere to these 
warnings:

Do not connect two or more power supplies together.

The power supply should be properly connected and grounded. 
Use the provided AC power cable to connect the power supply 
to a mains power outlet that is properly installed and grounded, 
in accordance with all local codes and ordinances. If the power 
supply cord is damaged, it must be replaced with the same type 
to comply with safety requirements.

Never alter the provided AC cable or plug. If the plug does not fit 
into the outlet, have an appropriate outlet installed by a certified 
electrician.

Use an extension cord only when absolutely necessary. The 
extension cord must have the same voltage and power rating as 
the original power supply plug. Make sure that the pins on the 
plug are of the same number, size and shape as those of the 
original power supply plug. 

Do not connect a backup battery directly to the power supply. 

Do not use the power supply to directly charge a battery.

Содержание TMAA13









Отзывы: