2
TMAA05-01/TMAA05-04 GPS Receivers
© Tait Limited June 2013
TMAA05-03 Plate Mount
The TMAA05-03 plate mount can be used to permanently mount the GPS receiver to a flat
surface. The plate mounts onto the bottom of the GPS receiver with the threespacer washers
and screws provided. The spacer washers must be positioned between the plate mount and
the GPS receiver. Two holes allow securing the plate to the mounting surface.
Installation
1 Drill any holes required for the cables and install suitable grommets or bushings in the
holes.
2 Plug the adapter into the 15-way auxiliary connector on the radio.
3 If applicable, screw the GPS receiver to the TMAA05-02 magnetic mount or the
TMAA05-03 plate mount using the three spacer washers and screws provided.
Place the spacer washers between the mount and the GPS receiver.
4 Position the GPS receiver where it has an uninterrupted view of the sky. This can be on
the roof of the vehicle or on the rear parcel tray in the vehicle.
5 If applicable, securely screw the TMAA05-03 plate mount to the mounting surface.
6 Run the GPS receiver cable to the adapter and plug it in. Tie up any unused cables.
Programming Radios
For information about programming the radio for use with the GPS receiver, refer to the
Help of the programming application. For information on GPS and AVL (automatic vehicle
location) applications, contact your radio provider.
More Information
Refer to your radio provider for more information about these products.
182.88 mm
12.12 mm
91.44 mm
22.25
mm
46.50
mm
93.00
mm
22.0 mm
5.5 mm (x5)
62.00 mm
138.0 mm
