Tait TM9456, Инструкция по установке и программированию

Страница: 34 / 53

TM9456 Dual-Radio Installation and Programming Guide Installing a Dual-Radio System 34
© Tait Limited July 2016
Installing the
Remote Cable
Figure 2.7 contains an overview of the connection between the radio bodies
and the control head.
Notice If a radio body does not have link J4 removed, or you cannot
identify the correct radio body to use, you will need to disassemble one
or both interfaces. See
“Removing the Body Interface” on page 22 for
more information.
1. Attach one end of the control-head remote cable to the innermost
port of the radio body with link J4 removed.
The outermost port of this radio body connects to the other radio body.
2. Attach the other end of the control-head remote cable to the rear port
of the control head remote interface.
3. Install the cable grommets. See “Removing and Installing
Grommets” on page 17 .
Figure 2.7 Connecting radio bodies to control head with graphical-display
UHF body with link J4 removed
to radio
body with
link J4 fitted
outermost
port
innermost
port
CH port
control head
control head remote
cable T02-00009-0103
(6 m / 19.6 ft.)