manualshive.com logo in svg

Tait TM8260, Руководство пользователя

Поделиться
Скачать
Tait TM8260 Скачать руководство пользователя страница 31

32 Basic operation

If you do not know your PIN or 
you receive a wrong PIN message, 
consult your radio provider or 
administrator.

Adjusting the speaker volume

The volume control also changes the volume level of the 
radio’s audible indicators.
Your radio may be programmed with a minimum 
volume level.

Standard control head

Rotate the volume control clockwise to increase the speaker 
volume and counterclockwise to decrease the volume.

Hand-held control head

Press 

 to increase the speaker volume and 

 

to decrease 

the volume.

Turning on control-head backlighting

The radio’s display and keypad light up when backlighting is 
on. This normally only happens when a key is pressed or a 
call is received. There are two ways you may be able to 
change the way backlighting operates on your radio:

■

turn on backlighting momentarily, using a programmed 
function key, or

■

change backlighting between on and off, using either a 
programmed function key or the Main menu.

Turning backlighting on momentarily by using 
a function key

You may be able to use a programmed function key to turn 
backlighting on momentarily. Backlighting remains on for a 
few seconds and then turns off.
Alternatively, the function key may be programmed so that:

Wrong PIN, 

try again

Содержание TM8260












































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды