Tait TB8100, Руководство пользователя

Страница: 232 / 254

222 Part I: Task Manager
© Tait Electronics Limited December 2007
Loopback
When the Loopback flag is enabled and the Tx Key line is activated, audio from
the line input is connected directly to line output. A balanced input can only
be looped back to a balanced output and an unbalanced input can only be
looped back to an unbalanced output. By default, the flag is disabled.
Intercom When the Intercom flag is enabled, a technician at the base station can
communicate with a console over the line. The Base Station’s microphone is
connected to line output. When the flag is disabled, the microphone is
disconnected, but the speaker still remains connected to the receiver Path A.
Receiver
When the Receiver flag is enabled, the receiver is able to receive as usual,
according to the current channel configuration. When the flag is disabled, the
receiver is unable to pass any received audio.
Transmitter
When the Transmitter flag is enabled, the transmitter is able to transmit as usual,
according to the current channel configuration. When the flag is disabled, the
transmitter is unable to transmit signal at all.
Talk through
repeater When the Talk through repeater flag is enabled, the base station feeds received
audio into the transmitter according to the current channel profile. (Edit
Channel Profile form: Audio Path tab. The
Talk-through repeater box
specifies the audio path.) When the flag is disabled, the transmitter is not given
audio from the receiver.
Line connected
base When the Line connected base flag is enabled, the base station feeds line in
audio into the transmitter according to the current channel profile. (Edit
Channel Profile form: Audio Path tab. The
Tx audio path A or Tx audio
path A check box must be selected.) When the flag is disabled, the transmitter
is not given line in audio.
Power save
When the Power save flag is enabled, the base station applies power saving
according to the current channel profile (Edit Channel Profile form: General
tab). When the flag is disabled, power saving is not applied.
Auxiliary supply
When the Auxiliary supply flag is enabled, the auxiliary power output is turned
on, if the optional auxiliary power supply PCB is fitted to the PMU, and if it is
configured to be under the control of Task Manager (Configure > Base Station
> Miscellaneous, Auxiliary power control box). If the Auxiliary supply flag is
disabled, the auxiliary power is turned off, unless it is configured for battery
charging (on when the AC mains supply is on).
TM signalling
profile
When the TM signalling profile flag is enabled, selecting the signalling profile
is under Task Manager control. When the flag is disabled, the channel table
selects the signalling profile.
TM channel
profile When the TM channel profile flag is enabled, selecting the channel profile is
under Task Manager control. When the flag is disabled, the channel table selects
the channel profile.
Transmit power
override
When the Transmit power override flag is enabled, the PA transmits using the
Task Manager override power level set in the current channel profile. When
the flag is disabled, the PA transmits using its normal power level