manualshive.com logo in svg

Tait T850 II Series, Руководство по обслуживанию

Поделиться
Скачать
Tait T850 II Series Скачать руководство пользователя страница 23

M850-00

Software History

A4.1

Copyright TEL

31/09/98

4

Software History

28/06/96

PGM800Win Version 1.0

18/08/97

PGM800Win Version 2.00

4.1

PGM800Win V1.0

PGM800Win V1.0 is different in concept from DOS versions of PGM800 in that it is Win-
dows

1

 based.  It also includes many new and improved features over DOS versions of

PGM800.  

The major changes are outlined below:

•

The Windows

 environment makes data entry and editing significantly easier. 

•

PGM800Win includes several new radio models which are not programmable
with DOS versions of PGM800.

•

Out of range frequencies will result in warning messages and will not be accepted
for entry into the standard library module.  User defined modules can be created,
however, allowing variation from the standard library module.

•

Channel numbers default to 0-127 to match the EPROM memory locations.  How-
ever, the user can change this setting so that the channel numbers run from 1-128
to suit his/her particular needs.

Note:

The data files produced by BASEPROG V1.0 and all DOS versions of
PGM800 are still compatible with PGM800Win V1.0.

4.2

PGM800Win V2.00

PGM800Win V2.00 is an upgraded and expanded version of PGM800Win V1.0.  It has
been developed specifically for T800 Series II base stations, but retains the ability to pro-
gram Series I equipment.

The major changes are outlined below:

•

PGM800Win V2.0 will program T800 Series II base station modules via serial com-
munications.

•

Deviation and reference modulation settings are written automatically to the
radio.

1. Windows is a registered trademark of the Microsoft Corporation.

Содержание T850 II Series



















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды