02/99 IPN: 409-20400-02
9
Basic Operations
Switching the Radio On and Off
Switch the radio on by rotating the volume knob clockwise to about one third of its maximum
setting. You will feel a click as the knob leaves the ‘off’ position. The control head display then
shows a power-up message.
Switch the radio off by rotating the volume knob fully anticlockwise.
Your T2040
II
retains some settings when it is turned off. When you next turn it on, the radio
uses these settings.
Volume Control
A long press of the
Function
key (
) toggles the confidence tone level between ‘normal’
and ‘quiet’. Press and hold the
Function
key for at least one second to hear a sample tone
from the speaker (similar tones are emitted by the radio during normal use
1
).
Repeat this action to hear the same tone at the alternative level (normal or quiet), and select
your preferred tone level. Adjust the volume knob for comfortable listening.
Note:
If the
Function
key (
) is programmed to operate an auxiliary device, it may not
be able to change the tone level as well.
You may need to finally adjust the volume when you receive your first call.
Checking Network Access
Check that the
SVC
indicator appears in the bottom of the display window within a few seconds
of power-up.
This shows that your radio has logged on to the network. If the
SVC
indicator is flashing, you
may be out of the coverage area of your network. If this is not the case consult your Tait
dealer.
1
The T2040
II
has either the MPT or ‘Tait-standard’ set of tones available. One set is selected during programming. This man-
ual refers only to the ‘Tait-standard’ tones.
Содержание t2040 series ii
Страница 1: ...Operator s Manual T2040 Series II T2040II ...
Страница 2: ...02 99 IPN 409 20400 02 ...
Страница 4: ...2 02 99 IPN 409 20400 02 ...
