Tait T2000-A75, Руководство по эксплуатации, Страница: 29 / 38

November 2001 M2256-000-00-051 29
GO_TO_CHANNEL (PC to A75)
The GO_TO_CHANNEL command forces the A75 to send a new channel number to its BCD
output. This will cause a channel change on the T201X radio
Example
An example of a ‘Go to Channel’ message is: g0202D5
[IDENT]
g
[PARAMETERS]
[CHANNEL_NO]
[PARAMETER] Function
[CHANNEL_NO]
Channel number
. A string of characters representing the new channel number.
The range of allowed characters is 0 to.9, and the maximum number of digits is 3.
For a T2010 radio the valid range is 1 to 4 and for a T2015 radio the valid range is 1
to 24.
Message Field Parameter
Entered at
terminal
[IDENT] GO_TO_CHANNEL. g
[SIZE] Size of parameter field 02
[PARAMETERS] [CHANNEL_NO] = 02 to change the radio to channel 2. The number can
be given in a 1, 2 or 3 digit format e.g. 2, 02 or 002. 02
[CHECKSUM]
Refer to the
Calculating the [CHECKSUM]
section
D5