2
T02-00005-ACAA Desktop Microphone
© Tait Limited May 2013
Radio Programming
The desktop microphone has an internal pre-amplifier. Therefore, the dynamic microphone
support in the UI Preferences form of the programming application should not be enabled,
the control head microphone gain should be set to normal (default).
The
FUNCTION
key can be programmed by setting CH_GPIO1 to an input (active low), and
assigning an action.
The
MONITOR
key is programmed according to hookswitch settings in the programming
application. Select the Hookswitch Monitor check box (Basic Settings form > Receiver
Monitoring tab), and select an option in the Hookswitch Monitor Overrides field. For more
information on these and other hookswitch settings, refer to the Help of the programming
application.
More Information
Refer to your radio provider for more information about this product.
Correct desktop microphone grommet seating
microphone
grommet
control head
