Web :www.taishansports.cn
Placement and debugging
1) As shown in the figure below, the dotted line represents the ground, and the
width of 50 is the field end line. Place the basketball stand on the center line of
the length of the court, and adjust the position of the basketball stand so that the
distance between the protective sleeve and the outer side of the end line is
1005mm. And adjust the 1
height of the basket 3050±6mm, and then use the hook wrench to lock the
adjusting sleeve;
Shandong Taishan Sports Equipment Co.,Ltd
Web :www.taishansports.cn
Placement and debugging
:
n in the figure below, the dotted line represents the ground, and the
width of 50 is the field end line. Place the basketball stand on the center line of
the length of the court, and adjust the position of the basketball stand so that the
the protective sleeve and the outer side of the end line is
1005mm. And adjust the 1-adjusting bolt shown in the figure below to make the
height of the basket 3050±6mm, and then use the hook wrench to lock the
Shandong Taishan Sports Equipment Co.,Ltd
n in the figure below, the dotted line represents the ground, and the
width of 50 is the field end line. Place the basketball stand on the center line of
the length of the court, and adjust the position of the basketball stand so that the
the protective sleeve and the outer side of the end line is
adjusting bolt shown in the figure below to make the
height of the basket 3050±6mm, and then use the hook wrench to lock the
