4
4.
After you have completed the entire registration, you will receive a message saying
that you have completed activation of the SIM card. Then your SIM card is activated
and ready for use.
5.
Once you have activated your SIM card, you will also receive an e-mail with PIN and
PUK codes and mobile number (Check spam if you do not receive the e-mail)
6.
To insert the SIM card into the tracker, screw the 4 screws on the back of the tracker
with the supplied screwdriver. Then open the lid on the back. (This can be hard to get
up, but use some power and it will loosen up.
7.
After opening the cover, open the SIM card terminal by sliding the lid in the direction
that shows "Open" (as you can see in the picture below)
8.
Then open the terminal and put the SIM card down, with the yellow side of the SIM
card down. Make sure the notch on the SIM card fits the notch on the SIM card
terminal.
9.
Close the lid and pull the lid up again to lock it.
10.
Attach the lid to the back of the watch again and tighten the screws.