5
1.
Open the box you received and remove the Gator3 watch as well as the charger plate
and charger.
2.
Connect the charger plate and charger wire by plugging the cord into the slot on the
charger.
3.
There will be some battery on your watch when you receive it, but to be sure we
reccommend, you charge it until the battery icon turns green. Then you have a full
battery and enough battery to complete the setup.
4.
When you charge the watch on the charger, this character will appear on the screen.
5.
When you have fully charged (This is done to treat the battery in the best possible
way) you are ready to start the watch setup.
1.
A SIM card is inserted into the box together with the watch and charger. This must be
activated before it can be used. This is done by visiting login.teleg.no
2.
When you are on the website login.teleg.no you select which product you have and
fill in the information needed.
3.
On the disc to which the SIM card is attached, the mobile phone number is displayed.
On the SIM card itself there are a 20 digit number. This should be entered where it
says "Sim Card Number" in the registration of the SIM card.
4. activate and install SIM-card
3.Setup watch
