Tail It Bike, Руководство пользователя, Страница: 4 / 14

3
1. Open the box you have received and take the tracker and charger out of the box.
2. There will be some power on the battery in your tracker when you receive it, but to
be sure, we recommend that you charge the tracker for a while. Estimated charging
time for full power on the battery is between 3-5 hours. The tracker will blink with a
green light when it is charging and continuously light with a green light when it is
fully charged. (It may take a few seconds for the light to come)
3. Once you have fully charged the tracker you are ready to start the tracker setup.
4. To switch the tracker on, hold down the power button (light source). When you see a
long green light, it means the tracker is turning on. Click the button once quickly, and
if it blinks twice, it’s confirming it’s on. To switch it off again, simply hold the button
down again until you see a long white light.
1. A SIM card is pre-installed inside the device when you receive it. This must be
activated before it can be used. This is done by visiting reg.tailit.com
2. When you go to reg.tailit.com, you can choose which product you have bought, the
subscription type you prefer and fill out the information required.
3. Type in the five-digit IMEI number printed on the sticker that is on your device, or
found on the declaration of conformity inside the box.
3. Activation the SIM-card
2.Set up device