AG-1000 User’s Manual
SMS Alert Gateway
All contents are subjected to change without prior notice
Rev 7.3
Page 19 of 27
Copyright © 2005 Taiko Network Communications Pte Ltd
4.2 Triggering 2
nd
AG1000-01 relay output
If a 2nd AG1000-01 is installed far apart, AG1000-01 is able to trigger a relay output of the 2nd
AG1000-01 using a SMS message. This section below will show a brief detail of the setup required.
Device 1
Device name
Include “Set” in front of “DO1" where “DO1” is the name of the relay output of
device 2.
ON Message
“1.” To trigger the relay when alarm on.
OFF Message
“0.” To off the relay when alarm off.
- Include Handphone number of device 2 in any Group of the Group List.
