1.
Remove “HOTCABI” from packing carton and make sure that a instruction manual and
accessories are included.
2.
Set “HOTCABI” as follows:
At a place where it is flat and stable.
At a place where it is not affected by heat. Avoid places where there is direct sunlight, and do
not place near stoves, microwave oven, etc. Keep “HOTCABI” away from such units by at
least 50 cm (19.68 inch).
Keep “HOTCABI” away from moist places or where it is susceptible to being splashed with
water.
Leave a space between “HOTCABI” and whatever may be placed next to it and make sure there
is space all around the unit to allow ventilation.
3.
Grounding
Ensure correct grounding is secured to protect against electric shock. Consult with your dealer
for details.
4.
Affixing drain tray
Hold both sides of a drain tray horizontally and push in until firmly inserted. When water
accumulates in the tray, remove and empty carefully. Reinsert the drain tray after being
emptied.
5.
Use an independent power outlet. Be sure to plug in the power plug
to a power outlet of 110-120V AC 15A minimum or 220-240V AC 8A
minimum, to which nothing else is connected.
SAFEＴY DEVICE: WHEN THE TEMPERATURE OF THE PRODUCT INSIDE EXCEEDES THE UPPER
LIMITS ABNORMALLY BY ANY MEANS, THE THERMAL FUSE BLOWS OUT THE ELECTRIC
CIRCUIT. WHEN IT WORKS, TURN OFF AND TAKE OFF THE POWER PLUG FROM ELECTRIC
OUTLET AND CONSULT TO TAIJI PRODUCTS DEALER OR OUR SERVICE FACILITIES.
Pre
Pre
Pre
Pre----us
us
us
useeee Instructions
Instructions
Instructions
Instructions
1.
Be sure that power switch is “OFF” position.
2.
In case the inner box is moist or there are foreign substances on its surface, wipe clean with a
dry towel, etc.
*Any remaining moisture, etc. could cause failure or malfunction.
3.
Connect the plug to the electric outlet. Be sure that power plug must be inserted correctly in
the position.
-７-
