Sequence of Usage
Pre-use Instructions
1. In case the inner box is moist or there are foreign substances on its surface, wipe
clean with a dry towel, etc.
* Any remaining moisture, etc. could cause failure or malfunction.
2. Insert basket in the inner box and place wet rolled towels on the basket.
* In the event the amount of towels put into the box is low, place them on the
basket as flat and as far apart as possible.
* The interior of the cabinet becomes heated from the wall surface.
Place towels inside the cabinet so that they do not come into contact with such
surfaces.
* When warm towels are needed in a hurry, please use towels that have been rolled
after having been immersed in warm water.
* Put towels in heat resisting polyethylene wrap. If used without such wrapper,
towels are apt to drying up quickly or becoming discolored.
3. Set the temperature selector switch located on rear panel of “HOTCABI.”
* Use at “L” setting in case towels get too hot, dry up or are discolored at “H” setting.
4. Close the door tightly and switch on. Power pilot lamp is lit and warming
commences.
* Empty drain tray frequently should water accumulate.
* “HOTCABI” may at times emit a faint popping or clicking sound.
This sound comes from the thermostat function and is not the sign of failure of
any sort.
Post-use Instructions
8
1. Switch off and remove plug from electric outlet.
2. Take out remaining towels and wipe inner box clean to remove residual moisture.
3. Empty water accumulated in the drain tray. Wash clean when considerably stained.
4. Stains on the main body should be wiped clean with a dry cloth or a tightly wrung wet cloth.
* Use a neutral detergent when stains are severe. Do not use cleansers containing
abrasives or solvents such as paint solvents.
* The appliance shall not be cleaned with a water jet.
5. Leave the door of the cabinet open for a while for moisture to dry as a means to prevent
odors.
H
L
“H” (high temperature)
setting:
Inner box temperature will be
maintained at 70–80
o
C.
Quickly warms towels at a
comparatively higher
temperature.
“L” (low temperature)
setting:
Inner box temperature will
be maintained at 60–70
o
C.
Gently warms towels at a
temperature lower than
“H” setting.
