3. Precautions for safety use:
Do not
disassemble:
Do not disassemble, repair nor reform the product unless
qualified electric engineer. It may cause unexpected
flashing or electric shock.
Connect ground
terminal:
The product is equipped with a power plug with ground
terminal. Connect ground terminal firmly. No ground
connection or improper connection may cause an electric
shock. Do not ground to gas piping or water piping.
No water:
The product is not water-proof construction. Do not sink
the product into water or do not expose water to the product.
It may cause an electric shock.
Check and clean
Check regularly power plug pin points and surface of plug
connecting face as no dust. Insert power plug firmly to
power outlet. Dust on power plug pin points or surface of
plug connecting face or improper connection may cause fires
and an electric shock.
Do not damage
power cord:
Do not damage power cord. Do not alter, tug, tie or
pressurize power cord. It may destroy inside the power
cord and may cause fires and an electric shock. Do not
place power cord proximately fire place. If the supply cord is
damaged, it must be replaced by manufacturer, its service
agent or similarly qualified persons in order to avoid a
hazard.
Do not use
outdoors.
Do not use the product outdoors. Rain, snow or fog may
cause fires and an electric shock.
Do not leave:
Please dispose of the product properly. Consult to local
dealer or public organization for disposal if necessary.
Disposal charge is not any obligation on the part of the
manufacture.
Do not put heavy
items:
Do not put heavy items or pressurize on door edge while
opened. It may cause door drop and any injuries by the
product tumbling.
No humidity:
Do not place the product at humid place. It may cause an
electric shock due to bad electrical insulation and leakage.
Use
independent
outlet:
Do not plug in too many leads into a single power outlet. It
may cause fires.
Do not bend
power
plug pins
Do not bend power plug pins to secure connection to power
outlet. It may cause fires due to improper connection.
Pull out the plug
with holding:
When disconnecting power plug, hold the plug, do not pull
the power cord. It may cause of deformation of power plug
pin points. It may cause fires and an electric shock.
Do not touch with
wet-hand:
Do not touch or operate power plug, power switch and other
electrical parts with wet-hand. It may cause an electric
shock.
Do not drop
Do not drop the product or give strong pressure to the
product. It may cause mechanical/electrical problems and
fires.