english
Taifun® BT
–
User Manual
2
Important
Please read these instructions carefully, before using your
Taifun® BT rebuildable tank atomizer. The manufacturer is not
liable for damage caused by improper use.
General information
With the Taifun® BT you have purchased a high quality
rebuildable tank atomizer, which has been designed exclusively
for use with e-liquid.
Before use it is necessary to install a piece of mesh according to
the instructions of this manual. Furthermore, it is required to fill
the atomizer with e-liquid after setup. If you are having trouble
installing the mesh, or if you have no previous experience with
rebuildable atomizers, please contact your supplier or
www.smokerstore.de
.
After the attachment the mesh, the resistance should be
measured. To do this, use a multimeter or a suitable battery
device with resistance measurement. If a short circuit is
detected, the atomizer must never be put into operation. Short
circuits can cause damage to the battery device and/or batteries.
In this case, check if the mesh is in contact with the base or the
wall of the atomizer and replace it with a new piece of mesh.