Taiden HPA-350/02, Инструкция по установке и эксплуатации

Страница: 9 / 17


When the "Fault" indicator is turned on, in order to
provide protection, the output is blocked, and PA
cannot output any sound from the loudspeaker;

The "Fault" indicator is on when the heat sinking is
overheating or PA detects a DC voltage;

The "Fault" indicator is on when over current,
over/under voltage, over temperature, high
frequency overload or muted;

In the first few seconds after power on, PA is
preparing, and the indicator will be turned on.
6. Thermal indicator

When the device is overheating, the indicator will
be turned on.
7. Power switch

Power on/off
8. Power connector
9. Signal input

Female XLR socket
10. Signal input

Male XLR socket
11. Gain switch

When the gain of PA is 1 Vrms, the input sensitivity
is 1 Vrms;

When the switch reaches 32 dB, the amplification
gain range is within dB 32;

When the switch reaches 26 dB, the amplification
gain range is within dB 26.
12. Mode switch

STEREO: channel A/B/C/D works independently;

BRIDGE: Signal inputs from channel A/C and
output from channel A/C;

MONO: Signal inputs from channel A/C and output
from channel A/B/C/D.
13. Power output

Four core SPEAKON speaker sockets;

Stereo / mono mode output: CHA/CHB/CHC/CHD:
1+, 1-;

Bridge mode output: CHA/CHC: 1+, 2+.
3