Dante output status:
HCS-5335M has 4 Dante outputs: Dante1 for the mixed audio of MIC1 and MIC2,
Dante2 for MIC1, Dante3 for MIC2 and Dante4 is null. The Dante Output displays dynamic level of Dante1, the
gain can be adjusted (range: -30 to 0 dB) as well and click “DSP” can set the parameter of EQ and DRC
(dynamic ratio compressor);
EQ:
31 segment graphical equalization, drag pushers to adjust equilibrium parameter (range: -15 to 15
dB). You can also enable/disable low-cut and high-cut features, and set their frequency point (range: 50 to
500 Hz for low-cut, 4000 to 12000 Hz for high cut). Click “Reset” to reset to 0 dB;
DRC:
sets the
Threshold, Ratio, Attack Time and Decay Time. You can also select Bypass mode.
Figure2.8: EQ settings
Figure2.9: DRC settings
10
