V. PACKING LIST
1. Headset * 1
2. USB cable * 1
3. User manual * 1
BLUETOOTH OPERATION
1.
Press and hold power button to turn on the headphones. The blue indicator light will
flash to detect Bluetooth enabled devices near you. The blue indicator light will go out
if no Bluetooth device is detected within 5 minutes.
2.
Pair the headphone with the desired Bluetooth device.
3.
Play/Pause as desired by pressing Multi-Function Dial.
4.
To answer an incoming phone call while using the headphones, press the
Multi-Function Dial button once. To end the phone call, re-press the Multi-Function
Dial button. Press the Multi-Function Dial twice to dial the last number dialed.
AUX PLAYBACK OPERATION
1.
Turn on the headset
2.
Insert a 3.5mm audio cable into the AUX jack on the back of the headset. Connect the
3.5mm cable to any audio device with a port.
3.
Press the Multi-Function Dial button to play or pause music.
CHARGING THE SPEAKER
1. The headset has a built-in Lithium battery. The battery is rechargeable and provides
approximately 4 hours of continuous use at 80% volume when fully charged.
2. Use the micro-USB cable to charge the headset. The red indicator light will illuminate
when the battery is low. The red indicator light will go out when the headset is fully
charged.
VII. COMPATIBILITY
Devices equipped with Bluetooth 3.0 or higher (for details please refer to the user manual
of that device). Bluetooth 3.0 including agreements as
：
A2DP, AVRCP, HFP.
VIII. TROUBLESHOOTING