Tahoe 289, Руководство пользователя

Страница: 5 / 24

III
Tahoe 289 E3/T3/Ethernet Bridge
Safety Instructions
Read the following safety notices before installing or operating the device:
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents.
Read the installation instructions before you connect the device to its power source.
Reliable earthing of this equipment must be maintained.
This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that
a fuse no larger than 240 VAC, 16A is used.
Check nameplate ratings to ensure there is no overloading of supply circuits that could have an effect
on overcurrent protection and supply wiring.
There is no physical circuit separation if the outlet is disabled. Always disconnect the power cord be-
fore removing the cover of any powered device.
Immediately disconnect the unit from the outlet and contact qualified service personnel if
any of the following events are noted:
1. The power cord has become frayed or damaged.
2. Liquid has been spilled on to the device or the device has been exposed to rain or water.
No serviceable parts inside! Do not attempt to repair or service this device yourself. Internal compo-
nents must be serviced by authorized personnel only.
Do not work on the system, or connect or disconnect cables during periods of lightning activity.