Taga Harmony PF-DC Series, Инструкция по эксплуатации

Страница: 9 / 12

9
Operation
INCORRECT PHASE
At the date of this instruction manual, there is no unified standard in most Eu-
ropean Union countries determining the position of the Live (L) and Neutral (N)
wires in an electrical outlet.
The term „incorrect phase” is an expression used in this manual only in relation
to this device to determine the L and N positions in the output power sockets
of the power filter.
POWER CABLES AND PHASE
The Live (L) and Neutral (N) wires in various power cables may be internally
connected between the cable plug and the connector in a different way.
If the Phase LED Indicator changes its status after the factory provided Power
Cable is swapped for another one, it is not a malfunction but a symptom that
the new power cable has a different internal connection as abovementioned.
If the Phase LED Indicator will illuminate then perform the steps required when
the phase is incorrect and which are described in the point “Phase LED Indica-
tor” in this chapter.
• When you want to turn off the power filter we recommend to turn off your
audio-video equipment firstly.
• This power filter is not a uninterruptible power supply unit (UPS).
It will not operate when the input power source fails (no power or too low
voltage).