Taga Harmony TTA-500, Инструкция по эксплуатации

Страница: 6 / 16

6
Controls and Displays
1. Prepare two AAA batteries.
2. Unscrew the screws on the rear of the remote controller.
3. Remove the rear cover.
4. Insert the batteries into the battery compartment. Carefully follow the polarity
diagram inside the battery compartment ( po and negative - symbols).
5. Reinstall the rear cover and screw in the screws.
Note!
• Always use AAA batteries and do not use the rechargeable batteries.
• Do not mix new batteries with old batteries or different kinds of batteries.
• If the batteries run out, remove the old batteries and replace them with new ones
within several minutes.
• If the batteries are placed incorrectly, they can cause explosion.
• Remove the batteries if the remote control is not used for a long period of time.
• Do not handle and store the batteries together with metallic tools.
Use the remote controller within a range of 5 meters from the amplifier and angles
of up to 30 degrees aiming at the remote controller sensor.
Note! Exposing the remote controller sensor to direct sunlight or strong light may
causefaulty operation.
Battery Installation
Note! Batteries are not supplied with this product.
Operating Range
Remote Controller Sensor
Remote Controller
Remote Controller