Taga Harmony TS Series, Инструкция по эксплуатации

Страница: 8 / 12

Bypass Output:
Addittional Speaker Selector can be connected to this output in order to expand system
capabillities and to add extra zones (rooms).
The OFF option should be used only when speakers and audio so-
urce have been selected and connected by a professional installer.
In the OFF position the protecting circuit is not operating - it can be useful if you
intend to use the speaker selector as a part of a planned system of impedance
matching volume regulatios, allowing you to get the most out of your amplifier
(receiver).
ON: Press down the protecting circuit switch (the switch in the ON position).
OFF: Press it again to switch off the protecting circuit (the switch in the OFF
position).
The RMS power of the audio source should not exceed the power
supported by this speaker selector otherwise this unit, audio source
and / or speakers may be damaged. This may void your warranty.
The Protecting Circuit Switch „PROTECT” should be always
switched ON :
• when connecting more than a single pair of speakers to a single
zone.
• when connecting 4Ω-impedance speakers to the speaker selector.
Failure to follow the above recommendations may damage this unit,
audio source and / or speakers.
This may void your warranty.