www.TagaHarmony.com
We strongly advise to contact a professional installer or dealer in order to install
TAGA Harmony products.
We recommend using high quality TAGA Harmony speaker cables and other
installation accessories.
IMPORTANT!
Your product is marked with the symbol as showed on the left.
For EU (European Union) member users:
According to the WEEE (Waste electrical and electronic equipment)
Directive, do not dispose of this product as household waste or commercial waste.
Waste electrical and electronic equipement should be appropriately collected and
recycled as required by practices established for your country.
For information on recycling of this product, please contact your local authorities, your
household waste disposal service or the shop where you purchased the product.
Your product is marked with the symbol as showed on the left.
For EU (European Union) member users:
This product has been tested and found in compliance with
requirements of the European Community
2004/108/EU (EMC) & 2014/54/EU (R&TTE) & 2006/95/EU (LVD) directives.
Kit Content:
1.5 meter detahable power cord
1PCS
3 meter active-pasive speaker interconnect cable
1PCS
1.8 meter interconnect stereo audio 3.5mm-3.5mm mini jack 1PCS
1.8 meter RCA-RCA audio interconnect cable
1PCS
Instruction
Manual 1PCS
TAGA EUROPE
POLPAK POLAND Sp. z o.o.
AL.JEROZOLIMSKIE 333A
05-816 REGUŁY k/WARSZAWY, POLAND
Email: [email protected]
High-Frequency
Driver
25mm (1”) TWG faceplate, Silk dome
Bass / Midrange
Driver
165mm (6.5”), Reinforced paper
cone
Built-in Amplifier
Power
2 x 25W RMS / 90W Dynamic Peak
Class A/B
Frequency
Response
52Hz - 20kHz
Sensitivity
85dB / Input Sensitivity: 600mV
Specifications
Connectivity Wired
3.5mm stereo jack, RCA stereo,
USB (MP-3 and charging up to
700mA), SD/MMC card
Connectivity
Wireless
Bluetooth
®
Power Requirements
& Consumption
AC 220 – 230V / 50Hz ; 100W
Dimensions
(H x W x D)
32 x 20 x 26 cm
Weight (net)
Active: 6.1 kg pc. / Passive 5.0 kg pc.
Bluetooth
®
is a registered trademark of Bluetooth SIG., Inc.
We reserve the right to change the technical data and the design of the product without notice as a result of further development.
