8
Speaker Mounting
The below mounting procedure applies to drywall walls, drywall ceilings and drop
ceilings or similar.
You will have to cut a hole in a wall or ceiling. With the right tools and a little extra care
and preparation, installing the speaker can be both quick and easy.
Models equipped with the screw type clamps
There are 2 types of paper templates which are helpful to cut out a hole for installing
the speaker.
Your speaker is supplied with one of the templates.
• Type #1
a template is drawn on a cardboard sheet and you have cut out a hole
along the drawn lines.
•
Carefully cut out hole drawn on the cardboard template.
•
Position the template in place you wish to mount the speaker, and draw a line on
the wall or ceiling along the inside edge of the template.
• Type #2
is a cardboard template which has the shape of a hole which has to be cut
out.
•
Position the template in place you wish to mount the speaker, and draw a line on
the wall or ceiling along the outside edge of the template.
•
Make your cuts along the line in the wall or ceiling. Try to keep the cuts neat,
however the frame of the speaker will overlap the hole to hide any rough edges.
•
Run the speaker cables leaving about 150cm (5 feet) of extra cable at the hole.
•
Connect the speaker cable to the speaker terminals.
CLAMPS CLOSED
CLAMPS OPENED
CLAMPS CLOSED
CLAMPS OPENED
