Taga Harmony HTR-1000CD v.3, Инструкция по эксплуатации

Страница: 34 / 40

Setting the Sleep Timer
When the CD-Receiver is turned on, repeatedly press the TIMER/SLEEP button to
select a set period of time (in minutes): 120, 90, 60, 45, 30, 15.
When the Sleep Timer is activated, [SLEEP] will be displayed.
Note! When the Sleep Timer is activated, press the TIMER/SLEEP button to display the
remaining time (it will be automatically displayed around 60 seconds before the Sleep
Timer is engaged).
To deactivate the Sleep Timer
Press the TIMER/SLEEP button repeatedly until [SLEEP OFF] will be displayed.
Setting the Alarm Timer
The CD-Receiver can be used as an alarm timer (clock) for the following inputs: DISC,
DAB, TUNER, USB.
Note!
* Setting the Alarm Timer is only available in the Standby Mode.
* Make sure that you have set the Clock correctly.
* To set the alarm timer, make sure to display the current time (press CLOCK ) or acti-
vate the Normal Standby Mode.
1. Press and hold the TIMER/SLEEP button, until [TIMER SET] scrolls and the input will
be displayed, e.g. DISC.
2. Use the ►►l, l◄◄ buttons on the front panel, or ►l, l◄ ; VOL + / - buttons on the
remote controller to select an input.
3. Press the TIMER/SLEEP button, the hour indicator will blink.
4. Repeat steps 2-3 to set the hour, minute and adjust the volume.
If the Alarm Timer is activated, then in the Normal Standby mode [
] will be display-
ed.
Note!
After the CD-Receiver is activated by the Alarm Timer, the volume level will be
gradually increased until it reaches the set level.
Adjusting the volume regulation manually will stop increasing.
Note!
• To exit the Alarm Timer setting mode without storing, press the button.
• If no button is pressed in 10 seconds, the CD-Receiver exits the Clock setting mode
automatically.
• If the the CD or USB input is selected, and no disc or a USB Flash Drive is inserted or
an incompatible format is detected, the TUNER input will be activated automatically.
To deactivate or re-activate the Alarm Timer
In the Normal Standby mode, press the TIMER/SLEEP button to activate or deactivate
the Alarm Timer.
• If the Alarm Timer is activated, [
] and the set time (for a while) will be displayed.
33