Taga Harmony HTA-700B v.3-USB, Инструкция по эксплуатации

Страница: 10 / 20

10
Hooking up the Amplifier
1. Make sure the amplifier is switched off (the Power Switch is in the top
position and the Power Cable is removed).
2. Turn the Volume Regulator to MIN (max counter clockwise). Screw in the
Bluetooth
®
antenna into the antenna socket.
Note! Make sure the antenna is securely and firmly installed - otherwise the
“HTA-700B v.3” Bluetooth
®
device may not be found or connection may be
unstable.
3. Using speaker cables (not supplied with this product) connect your speakers to
SPEAKERS OUT connectors located on the rear of the amplifier (check “Hooking
Up Speaker Cables” for more details).
4. HTA-700B v.3-USB model only: If you want to play music from a computer: using a
A-to-B USB 2.0 digital cable (not supplied with this product) connect the computer
to the USB Input port (check “USB Connection” for more details).
5. If you want to play music from audio sources equipped in an analog output (CD
player, satellite or FM tuner, video console etc.): using RCA interconnect cables
(not supplied with this product) connect them to the analog inputs (CD, LINE).
6. If you want to play a digital audio source equipped in an optical output (CD player,
video console etc.): using a digital optical cable (not supplied with this product)
connect it to the Digital Optical Input.
7. Preamplifier Output (PRE OUT): this amplifier is equipped with a preamplifier
output. Using an RCA interconnect cable (not supplied with this product) you
can connect to it external equipment (power amplifier, powered speakers, active
subwoofer etc.). The PRE OUT level is variable controlled according to the Volume
Regulator.
8. If you want to listen to music via headphones: connect the headphones to the
Headphones output (check “Headphones connection” for more details).
9. If you want to stream music via Bluetooth
®
from compatible devices check
“ Bluetooth
®
Connection” for more details.
10. Your amplifier is ready for operation.
Note! Avoid to short-circuit of cables – it can damage this amplifier or speakers. This
may void your warranty.
Note! Only speakers within range of impedance 4 - 8Ω can be connected. Connecting
speakers outside this range can damage this amplifier and/or speakers. This may void
your warranty.