Taga Harmony Commercial Audio TBS Series, Руководство пользователя

Страница: 9 / 16

Speaker Mounting
9
• Remove the speaker grille by pressing the mounting screws from the back of the
speaker.
• With grille removed, insert the speaker into the mounting hole.
• Use a screwdriver to turn the mounting screws slowly clockwise.
• The cut edges of the wall or ceiling will be sandwiched firmly between the mounting
clamps and the speaker frame.
Models equipped with the spring clamp mechanism
• Press and hold the spring clamps in the upward position.
• While holding insert the speaker into the mounting hole.
• Make sure that the longer spring clamps are inserted into the mounting hole (in the
upright position) while the shorter spring clamps remain outside of the mounting
hole. Push the speaker into the hole – in this way the spring clamp mechanism is
sandwiched in the mounting hole.
ON-WALL SPEAKERS (TOW)
• Screw a hook in the wall where you want to mount the speaker.
WARNING! Depending on the mounting surface use appropriate screws or wall
anchors (ask your local dealer or installer for advice). Make sure that the hook and its
installation are compatible with the weight of your speaker.
• Connect the speaker cable to the speaker terminals.
• Hang the speaker on the hook