TAG Tesclate, Руководство пользователя

Страница: 11 / 34

TAG TECSLATE Page 7 of 30
SAFETY TIPS
■ Do not touch screen without using a screen protector, as it can leave hard to remove oils from
your skin.
■ Never remove back cover or serious damage/injury may occur due to high voltage parts.
■ Avoid exposing LCD display to direct sunlight or any other heat sources.
■ Exercise sufficient caution when moving or hanging the LCD display.
■ Only set on TAG TECSLATE
™
stand (sold separately) or hang on wall in a well-ventilated
area.
■ Do not set any objects on top of LCD display, make sure all cords are free as well.
■ If anything unusual occurs while using the TAG TECSLATE
™
display, unplug immediately and
call your dealer. It is not safe to continue to use if not in perfect running condition.
■ Do not apply too much pressure to LCD screen or unrepairable damage could occur.
FRONT PANEL KEYS
Switching key between monitor standby and on mode.
If menu is hidden, press this key to display OSD menu; if
menu displays, press this key to exit current menu.
Switch among all available input signal sources (AV1, S-VID-
EO, COMPONENT1, COMPONENT2, HDMI2, VGA, USB,
TECSLATE™)
Adjust sound output level of speaker (same function as volume key
on remote control). In OSD menu, it is used to move cursor left/right
or change settings (same function as cursor left/right key on remote
control).
In OSD menu, it is used to move cursor up/down (same function
as cursor up/down on remote control).
A red light indicates display is in standby mode;
A green light indicates display is in working mode.
1)
2)
3)
4)
5)
6)