PREMIO RANGE User’s Manual
15
HC-30 Charger
Handheld microphones and beltpack transmitters can be
reloaded.The charger HC-30 is for the handheld microphone SQ-5016.
Before loading check that the batteries are rechargeable ones.
VHF OR UHF BELT TRANSMITTERS
Corresponding to the wireless system the Belt Transmitter has to be a VHF or UHF Transmitter.
BELT TRANSMITTER M-1002 (VHF)
Input level Gain control adjustment
Low-impedance "MT" gain control is situated inside the beltpack transmitter. Gain control port is an
adjustable design that enables user to use microphones of different output levels. To adjust the
audio input levels, simply use a small screw driver to switch the "MT" control till a desired level is
chosen.
For rechargeable batteries we strongly recommend NiMH batteries, no alkanies.
Wrong batteries can damage the microphone functions. Check battery status. Many
batteries are known to have leakage problem of conductive and corrosive liquid.
Remove the batteries if you do not plan to use the microphone for a few days. Also
check that transmitter and receiver are on the same channel.
L
L
CAUTION: BATTERY
PREMIO RANGE User’s Manual
14
HANDHELD MICROPHONE TRANSMITTER SQ-5016 (UHF)
The microphone is equipped with 16 frequencies
1. Microphone capsule
2. Battery status led
3. Power switch (ON/OFF)
4. LCD display
5. Battery compartment
6. Rotative protective cap for controls
7. Lock/Unlock
8. Set
9. UP
10.DOWN
11.Charging Port
12.Name plate
Microphone settings
Press on Set for 2 seconds to enter into Settings.
1. Making changes to CHANNEL/FREQUENCY
Use UP or DOWN button to go to the Channel/Frequency page. Pressing UP or DOWN button
will increase of decrease the channel number. The corresponding frequency will change accordin-
gly. When a desired channel is being selected, it will automatically be saved and stored in the
memory.
2. Making changes to SENSITIVIY
Use UP or DOWN button to go to the Set page.. Use UP or DOWN to decrease or increase sensi-
tivity. Level: 1 - 4 . for singing, Level 4 for speech or if microphone is used with a stand
3. Making changes to battery selection
Use UP or DOWN to go to the Battery selection page. Press UP or DOWN to move the cursor to
either: NiMH (rechargeable battery) or AKLN (alkaline). When the battery has been selected it is
saved and stored in the memory.
Changing Batteries
2 pieces of AA batteries are used. Unscrew the tap of battery compartment and insert the
new batteries. BEWARE OF THE POLARITY
501
6