background image

Table of Contents:

Features

1

Front Panel

Front Panel - Power & Reset Switches

2

Front Panel - CD-ROM

3

Front Panel - Removable Hard Drives

4

Rear Panel

Rear Panel

5

Rear Panel - I/O Ports

5

Rear Panel - Power Supply

6

SCSI IDs

7

Top Access Removal

8

Windows NT 4.0 Load Instructions

8

©2001 Technology Advancement Group, Inc. All rights reserved.

Technology Advancement Group, TAG, HDIT, and the TAG Ball graphic are trademarks or regis-
tered trademarks of Technology Advancement Group, Inc.  This manual and/or its contents may
not be duplicated without written permission of Technology Advancement Group, Inc.
Printed in the USA

Figures:

Figure 1

Front Panel Power & Reset Switches

2

Figure 2

PCMCIA Reader (If Equipped)

3

Figure 3

Removable Hard Drive

4

Figure 4

Removable Hard Drive Exposed

4

Figure 5

Rear Panel

5

Figure 6

Rear Panel - I/O Ports

5

Figure 7

Rear Panel - Power Supply

6

Figure 8

SCSI IDs

7

Figure 9

Top Access Panel Removal

8

7

     

The HDIT 2U 1GHZ PIII SERVER is featured with several SCSI devices, each with

its own unique SCSI ID. The following is a list of all SCSI peripherals and their respec-
tive SCSI IDs.

SCSI IDs

SCSI ID

Device

RAID Controller

      0

Hard Drive (Lower Left)

      1

Hard Drive (Upper Left)

      2

Hard Drive (Upper Right)

      3

Hard Drive (Lower Right)

                         SCSI Controller
      3

PCMCIA Reader - 

(If Equipped)

Figure 8

Содержание HDIT 2U







Отзывы: