BOMBER User’s Manual
18
Keys
Explanations
Front panel
player
Remote
POWER
On/Off
PLAY/
PAUSE
Plays music
Pause
STOP
Stops music
FUNC
To change mode
USB CARD AUX
UP/CUE
Title skip
Press briefly to select next title.
Press a little longer to go forward in the title (>0,7s)
Play mode :
The selected track starts automatically
Stop/Pause mode:
The selected track does not start automatically.
Program mode:
Skips to next track according to selection
DOWN/
REV
Title skip
Press briefly to select previous title.
Press a little longer to go backward in the title (>0.7s)
Play mode :
The selected track starts automatically
Stop/Pause mode :
The selected track does not start automatically
Program mode :
Skips to previous track according to selection
DELETE
In
USB mode
, press DEL and use >> Next or << Back to
select file. .Press for a while >> Next or << again to select the
file.
Press on DEL to start deleting the file
BOMBER User’s Manual
7
BELT TRANSMITTER SM-5016
Belt transmitter settings
Press on Set for 2 seconds to enter into Settings.
1. Making changes to CHANNEL / FREQUENCY
Use UP or DOWN button to go to the CHANNEL /FREQUENCY page. The
cursor will flash to allow changes to be made. Pressing UP or DOWN button
will increase or decrease the channel number. The corresponding frequency will change accordin-
gly. When a desired channel(frequency) is being selected, it will be automatically saved and stored
in the memory.
2. Input Level Gain Control Adjustment
Low impedance (Lo-Z) " MT" & high impedance (Hi-Z) " GT" gain controls are situated inside the
transmitter. Gain controls are adjustment ports that enable you touse microphones of differing out-
put levels and Guitar or instruments with Hi-Z output. To adjust microphone (Lo-Z) input levels,
turn the "MT" control and to adjust the Guitar or instrument (Hi-Z) input, adjust the "GT" gain
control to set the transmitter's desired audio input level.
3. Making changes to Battery selection
Use UP or DOWN button to go to the Battery selection page. Press SET for
about 2 seconds to activate the cursor. Press UP or DOWN button to move the
cursor to either NiMH (rechargeable battery) or AKLN (Alkaline battery)
position.When the desired option has been selected, press SET for about 2
seconds to save and store the data in the memory.
1. Antenna
2. Battery weak indicator
3. Audio mute switch
4. Mini-XLR connector
5. Power ON / OFF switch
6. LCD display
7. Charging port
8. Cover release button
9. Charging contacts
10. Lavalier microphone
11. Mic clip
12. SET
13. UP
14. DOWN
15. GT
16. MT
2
1
3
4
9
7
8
5
6
10
11
12
13
14
15 16
