TAG Bohemia 7B, Руководство пользователя

Страница: 10 / 11

BOHEMIA User’s Manual
13
Keys Explanation
Front Panel
Remote
PLAY/
PAUSE If on Stop CD starts playing
If on Play it turns to Pause
If on Pause the CD starts playing again
STOP/
EJECT Stops music or
CD ejection
Pitch
Control Clockwise to increase music speed and anti clockwise to
decrease music speed.
ESP Anti choc memory. Lasts 40 seconds
UP/CUE
Skip Single and slightly pressed skips to next track. If pressed
again a little longer goes forward in the track.
Play mode:
The selected track starts playing
Stop/Pause mode:
Skips to next track.
Program mode:
Skips to next track according to program selection
DOWN/
REV
Skip Single and slightly pressed skips to previous track. If pres-
sed again a little longer goes to previous track
Play mode:
The selected tracks starts automatically
Stop/Pause mode:
Playing does not start automatically
Program mode:
Skips to previous track according to program selection
FOLDER
Skip Enables to skip to next file
Stop mode: skips to next file
Program mode : skips to the first track in the next file.
Play mode : skips to the first track in the next file
BOHEMIA User’s Manual
10
BELT TRANSMITTER SM-5016 (UHF)
Belt transmitter settings
Press on Set for 2 seconds to enter into Settings.
1. Making changes to CHANNEL / FREQUENCY
Use UP or DOWN button to go to the CHANNEL /FREQUENCY page. The
cursor will flash to allow changes to be made. Pressing UP or DOWN but-
ton will increase or decrease the channel number. The corresponding fre-
quency will change accordingly. When a desired channel(frequency) is
being selected, it will be automatically saved and stored in the memory.
2. Input Level Gain Control Adjustment
Low impedance (Lo-Z) " MT" & high impedance (Hi-Z) " GT" gain controls are situated inside the
transmitter. Gain controls are adjustment ports that enable you touse microphones of differing
output levels and Guitar or instruments with Hi-Z output. To adjust microphone (Lo-Z) input
levels, turn the "MT" control and to adjust the Guitar or instrument (Hi-Z) input, adjust the "GT"
gain control to set the transmitter's desired audio input level.
3. Making changes to Battery selection
Use UP or DOWN button to go to the Battery selection page. Press SET for
about 2 seconds to activate the cursor. Press UP or DOWN button to move
the cursor to either NiMH (rechargeable battery) or AKLN (Alkaline bat-
tery) position.When the desired option has been selected, press SET for
about 2 seconds to save and store the data in the memory.
1. Antenna
2. Battery weak indicator
3. Audio mute switch
4. Mini-XLR connector
5. Power ON / OFF switch
6. LCD display
7. Charging port
8. Cover release button
9. Charging contacts
10. Lavalier microphone
11. Mic clip
12. SET
13. UP
14. DOWN
15. GT
16. MT
2
1
3
4
9
7
8
5
6
10
11
12
13
14
15 16