TAG770 User’s Manual
10
VHF OR UHF BELT TRANSMITTERS
Corresponding to the wireless system the Belt Transmitter has to be a VHF or UHF Transmitter.
BELT TRANSMITTER M-1002 (VHF)
Input level Gain control adjustment
Low-impedance "MT" gain control is situated inside the beltpack transmitter. Gain control port is an
adjustable design that enables user to use microphones of different output levels. To adjust the
audio input levels, simply use a small screw driver to switch the "MT" control till a desired level is
chosen.
Battery Installation
M-1002 uses 1 piece of 9V battery. To install new
or replace the old battery, first open the
battery compartment cover, then insert the
new battery according to its correct polarity as
indicated. For longer operation hour, Alkaline
battery is recommended!
Belt Clip
This uniquely designed belt clip allows 360
degree rotation. Select the best position
to achieve optimum wearing comfort.
Many batteries are known to have leakage problem of conductive and corrosive
liquid. Remove the batteries if you do not plan to use the belt transmitter for a few
days. Also check that transmitter and receiver are on the same channel.
L
CAUTION: BATTERY
TAG770 User’s Manual
7
OPTIONS
OPTIONS
WIRELESS SYSTEM VHF OR UHF
The cabinet can be equipped with one wireless system. It can be chosen between a VHF single fre-
quency receiver or an UHF 16 frequency receiver. The receiver is built in the inferior part.
Technical caracteristics of receiver R-300M
VHF receiver, Non Diversity
3
Volume button:
Seperate volume control for the wireless system.
3
Switch on the handheld microphone/beltpack transmitter:
The LED is lightning when the VHF link between transmitter and receiver is ok.
Technical caracteristics of receiver SDR-500M
UHF receiver, Non Diversity, with Pilotone.
3
Volume button:
Seperate volume control for the wireless system.
3
Switch on the handheld microphone/beltpack transmitter:
The LED is lightning when the UHF link between transmitter and receiver is ok.
Channel can be changed with the switch located near the volume control.
VHF OR UHF HANDHELD MICROPHONE TRANSMITTER
Corresponding to the wireless system the Microphone has to be a VHF or UHF Microphone
Transmitter.
HANDHELD MICROPHONE TRANSMITTER Q-1002 (VHF)
The microphone is equipped with 1 frequency
1. Microphone capsule
2. Battery status - LED indicator
3. Battery compartment
4.Power switch (ON/OFF)
2
1
3
4
