19
D
A
B antenna
18
menu functions
D
A
B fact. defaults
This will restore all Digital Radio settings back to their factory
defaults. Parameters included are: station name and radiotext are
shown on the display, 'Dynamic Compression' and 'Program
Search' are switched off.
outdoor antenna
indoor antenna
In order to receive DAB radio signals, your DAB receiver module
needs to be connected to a suitable DAB antenna. To get the best
performance, you should use a dedicated, high-performance
outdoor antenna
(1)
.
Using high-quality, 50
Ω
cable terminated with a BNC connector,
connect your DAB antenna to the socket marked
digital radio
(DAB) rf input (option)
on the rear of your DPA32R
DAB
. The
antenna should be matched to a 50
Ω
load and designed for
174 - 240 MHz (and depending on your location
(2)
also 1452 -
1492 MHz) operation.
You should have your antenna installed by a qualified contractor
to make sure you get the best possible signal and that the
installation is safe.
Even if you do not have a high-performance outdoor antenna,
you can still use your Digital radio , although at reduced
capability
(3)
. To provide the best signal strength, this antenna
(supplied) should be vertically mounted
(4)
.
1. Please visit our website
www.tagmclarenaudio.com
to download the technical
paper describing DAB antennas and their installation
2. Please consult your retailer if you are unsure of which antenna to purchase
3. The supplied DAB antenna will only allow you to receive stations which have a
strong signal, so your choice of available stations may be much reduced
compared to an outdoor DAB antenna
4. Move the antenna until you have best reception
GRP00423.06 DPA32R DAB Manual 10/9/01 4:22 pm Page 18
