manualshive.com logo in svg

TAG MCLAREN AUDIO AvantGarde 100X5R:10, Руководство пользователя

Поделиться
Скачать
TAG MCLAREN AUDIO AvantGarde 100X5R:10 Скачать руководство пользователя страница 16

16

|

safety first

preparation

We know you are keen to get your 100x5R:10 up and running. This section will have you
listening as quickly as possible. The controls diagrams located on pages 2-4 of this manual
will help you find your way around your 100x5R:10

(1)

.

The 100x5R:10 is capable of consuming 
over 1300 Watts of electrical power during
demanding presentations. This results in
significant heat being generated. 

• Please ensure that there is adequate ventilation

above and below the unit.

• The ventilation of the 100x5R:10 should not

be impeded by covering the ventilation slots
with items such as newspapers, table cloths,
curtains etc.

• Place the 100x5R:10 on an open flat surface.
• Do not use in a cabinet or on a soft surface

such as a carpet.

• Do not place any other piece of equipment on

top of the 100x5R:10. 

• Do not place naked flame sources such as

lighted candles on the 100x5R:10.

• Do not expose the 100x5R:10 to dripping or

splashing liquids.

• Do not place objects filled with liquids, such 

as vases, on or near the 100x5R:10.

1. Throughout this instruction manual, 

bold

print indicates the

lettering that you will find on the panels of your 100x5R:10
and the remote control

safety first

before you start

positioning

To prevent the risk of shock
follow these instructions
carefully. If in doubt consult a
qualified electrician.

Make sure that all the components of your
system are disconnected from the mains
supply whenever you change any connection.

the front panel power switch

Please be aware that even when the front
panel switch is in the off position, the unit is
still connected to the mains supply. If the unit
is not to be used for some time, unplug the
mains connector from the wall socket outlet.

GRP00940.01-UK 100x5R-10.qxd  10/17/02  5:19 PM  Page 16

Содержание AvantGarde 100X5R:10


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды