We are convinced it will give you many hours of
listening pleasure.
The 125M is a very powerful, high-quality, single-channel
power amplifier (often referred to as ‘monobloc’) with an
output of outstanding clarity and purity. It complements our
PA20R and PA10 preamplifiers in performance and
appearance. The 125M is ideal for larger rooms or for high-
performance loudspeakers which require a large reserve of
power from the amplifier to give their best.
shorter cables, superior sound
You can place a single-channel amplifier
near to each loudspeaker to minimise the
length of the loudspeaker cable. Short
cables provide less resistance to the flow of
current into the loudspeaker, allowing the
combination of amplifier and loudspeaker
to reproduce the finest nuances of the
music with the utmost clarity and
precision. Furthermore, if you use two
125Ms for a stereo system interference
between channels is negligible.
low intermodulation distortion
The theoretically-ideal amplifier
reproduces sound perfectly over an infinite
range of frequencies – starting from well
below the audible range and extending far
welcome
welcome
05
04
Thank you for purchasing the TAG McLaren Audio monobloc 125M.
above the capabilities of human hearing.
Although sound outside the human hearing
range of approximately 20 to 20,000 Hz
cannot be heard, it can significantly distort
the quality of music reproduction through
an effect that audio engineers call
‘intermodulation distortion’.This type of
distortion moves imperfections that
originate outside the hearing range back
into the audible frequencies.To minimise
this effect,TAG McLaren Audio amplifiers
have a frequency response which extends
both above and below the range of normal
human hearing.
straight line technology
To prevent intermodulation distortion,
an amplifier must respond to very low
frequencies but block any Direct Current
(DC).This is traditionally achieved using
monobloc 125M
GRA00046.1-[CA]125M 09/03/01 16:03 Page 5
