TAGHeuer Timing
Page 5 / 20
2.2. General
2.2.1. How to navigate the different modes
To navigate into a different mode :
-
The Pocket Pro has to be stopped (
STOP
)
-
Reset memory (
START/STOP
+
MEMORY
)
-
Pressing the
MODE
button now allows you to change the Timing Mode
Sequence :
DATE
STOPWATCH
TIME
CD
A
B
C
2.2.2. Power
The Pocket Pro functions with an internal battery. It can be recharged when it is
connected to a PC (USB cable) or by a (USB – 5VDC) power supply
When not used for 36hours, the Pocket Pro will switch OFF automatically (LCD OFF)
To wake up the Pocket Pro, just press any button.
It is also possible to switch OFF manually the Pocket Pro by pressing simultaneously
the
MODE
and
MEMORY
buttons for 5 seconds.
When the Pocket Pro is OFF, all the times are stored in memory.
The icon
will indicate the level of the battery
During charge: 75% ON / 25% OFF blinking
Fully charged:
with USB Cable: icon ON
Without USB cable: icon OFF
Low level
(<10% charge): blinking 50% ON & 50% OFF
(you still have 2-3 days autonomy)
2.2.3. Time Memory
The Pocket Pro has a memory of 800 times.
The number of memorized times is shown on the 3 digits (Memory status)
When the memory reaches 90% capacity (720 times), the 3 digits will flash.
Warning
Once the memory is full (800 times), the next time recorded will be stored
as 001
The previous time will be automatically deleted
The LCD will continue to flash
The memorised time can be recalled and displayed on the LCD at any time (even
during a timing session).
By pressing the
MEMORY
button, the memorized time 001 will be displayed as the
button is held down. The number of the memory shown is displayed on the top-left of
the LCD
Press the
MEMORY
button again and the next stored time will be displayed.
