R:\Timing\PRODUITS\HL2-33\EN\HL2-33_EN_02-09.doc
12.02.2009
Page 8 / 12
E) Output jacks
(7)
•
Normally-Open collector outlet
Working contact (short circuit between black and green terminals
•
Use only high-quality banana plugs
Green terminal : Impulse
Black terminal : Ground
When you initially connect to your timer, polarity of this two-wire connection is
important (no damage will result – it just won’t trigger the connected timer).
F) Changing the batteries
•
Remove the screw underneath the case.
•
Slide the electronic unit out of the case.
•
Change the 3 batteries observing the polarities marked on the bottom.
•
Be sure to use good quality Alcaline type 1.5 volt batteries
(UCAR Energizer E-91).
•
Put the electronic unit back in the case and do up the screw carefully.
DO NOT OVERTIGHTEN
.
The use of high quality Lithium batteries is also recommended and yields
weeks of constant use. Check the operation and roll the batteries in the casing
to ensure proper seating.
IMPORTANT
If timing is interrupted for a long period or when it is finished:
Turn button
(2)
and
(10)
TO
OFF
position
