V2
STEP 3
: Insert End caps (E) into channel on horizontal bars (H). Tighten set screws while pushing End cap.
step 2: Detail 1
Add arrows
Paint Jig (L), End cap
step 2: Detail 1
Add arrows
Paint Jig (L), End cap
Insert vertical
bars and end
caps
1
Insert
Jig K & L
2
STEP 3
: Insert End caps (E) into channel on horizontal bars (H). Tighten set screws while pushing End cap.
Secure
corners of
Vertical Bars
3
STEP 4
: Insert aligning Jig 1 (J1) into the channel on the horizontal bar (H).
Top view
STEP 4
: Insert aligning Jig 1 (J1) into the channel on the horizontal bar (H).
Top view
Add arrows (dotted)
Paint Vertical and drill bits
Add rotating arrow
step 3: Detail 1
Add arrows (dotted)
Paint Vertical and drill bits
Add rotating arrow
step 3: Detail 1
Add arrows (dotted)
Paint Vertical and drill bits
Add rotating arrow
step 3: Detail 2
Add arrows (dotted)
Paint Vertical and drill bits
Add rotating arrow
step 3: Detail 2
L
L
H
H
L
L
ASSEMBLY
PART B:
Page 2
B
B
B
C
G
C
K
L
L
K
C
C
