Taffio KM3D-360 Скачать руководство пользователя страница 14

Страница: 14 / 25

displayed; Original view: when the left and right turn lights are turned on, the left and right
original views are displayed;

3.5 Radar start

Start: the radar can start 360 panorama;

Off: Radar cannot start 360 panorama;

3.6 Front and back view

Original view: the front and rear views are displayed as original views;

Corrected view: the front and rear views are displayed as corrected views;

3.6 Follow the trajectory

Open: When the front and back are displayed as the corrected view, the view will move with
the change of the track line;

Close: Close the track follow function;

3.7 Display delay

10 seconds: When the 360 is turned on, when the user does not perform any operation, the
360 will be automatically turned off after 10 seconds

30 seconds: When the 360 is on, when the user does not perform any operation, the 360 will
be automatically closed after 30 seconds

1 minute: When the 360 is turned on, when the user does not perform any operation, the 360
will be automatically turned off after 1 minute

5 minutes: When the 360 is turned on, when the user does not perform any operation, the 360
will be automatically turned off after 5 minutes

3.8 Encoder

Select the matching decoder model

Содержание KM3D-360


























Результаты поиска

Содержание KM3D-360

Отзывы:

Бренды по названию

Популярные бренды

Taffio KM3D-360, Руководство пользователя

Результаты поиска

Содержание KM3D-360

Отзывы:

Бренды по названию

Популярные бренды