Taewoo cuTex TBC-553L, Как использовать

Страница: 6 / 14

E-mail : taewoo@cutex.co.kr http://www.cutex.co.kr
- 5 -
At first, please lay down upper knife
a little, please refer to below image.
And then turn no. 5 screw to make
lower knife to close to upper knife.
And then make lower knife close to
upper knife by turning no. 1~4 screws.
After doing above steps, please test
with paper and check which side of
paper is not cut, and make those side of knife close to upper knife by turn proper
screws.
Please turn it little by little, we recommend about 5 degrees a time.
After finishing, please fasten all #B-15, clamping bolts.
If you need further information, please contact us at any time.