Misprints as well as technical changes reserved
EFM2000.DOC HS 03/98 V3.260298.GB.002
8
6.0 Operating Mode / MODE Selection / Decimal Place
The operating mode, the mode selection and the decimal place can be adjusted by setting
the parameter counter to number 2.
P
T1
lights up
T2
Figure 4:
Display of the parameter counter for setting the Operating Mode / MODE
Selection and Decimal Place
6.1 Operating Mode
The Frequency Meter FM 2000 offers a selection between three operating modes:
•
Frequency Meter
•
Period time Meter
•
Impulse Counter
The first digit display (right side) indicates the operating mode when the parameter
coungter is set to number 2:
0: Frequency Meter
The operating mode is set
for frequency measurement
1: Periode Time Meter
The operating mode is set
for measuring the period time
(very exactly frequency display in
the range of 0,1 to 100Hz)
2: Impulse Counter