SPARCbook Portable Workstation User Guide
9-19
Remote Computing
AT Command Set
Vn
Response Format
This command is used to select the format of response
made by the modem to the host:
n = 0
Single Digit Response
n = 1
Extended Response
Xn
Select Extended Response Set
&Fn
Fetch Factory Configuration
This recalls the factory settings of the modem.
n = 0
Recall factory profile 0
n = 1
Recall factory profile 1
&V
Display Current Configuration and Stored Profiles
This displays the currently active configuration, the
stored profiles and first four stored telephone numbers.
&Wn
Store Current Configuration
Store the currently active configuration, including S
registers, as a profile n (0 or 1).
&Yn
Designate a Default Profile
Selects the profile used after a hardware reset.
&Zn=x
Store Telephone Number
The modem can store up to 20 numbers:
n = Number memory 0 - 19
x = Dial string of up to 40 characters
%Cn
Enable/Disable Data Compression
n = 0
Disable data compression
n = 1
Enable MNP 5 data compression
n = 2
Enable V.42 bis data compression
n = 3
Enable V.42 bis and MNP 5 compression
%En
Enable/Disable Auto Retrain
This controls whether the modem automatically monitors
the line quality and requests a retrain when needed:
n = 0
Disable auto retrain
n = 1
Enable auto retrain
S3UG4_Book Page 19 Friday, August 8, 1997 11:37 am
