TGWxE1-2G PRI (ISDN) Trunk
Gateways Series for Aeonix User Configuration Manual
5-40
5.7.3 ISDN Status
Click the
Logs > ISDN Status
tab to open this interface.
Figure 5-22 ISDN Status Interface
Table 5-21 ISDN Status Parameters
Name
Description
ISDN Group ID
The ID of an ISDN group.
state
Three state options:
IS - indicates the in-service state.
OOS - indicates the out-of-service state.
MOOS - indicates the manually taken-out-of service state, i.e. the backup signaling
channel is disabled.
Int Id
The ID of an interface card, which is 0.
side
Two sides of the ISDN: user and network side, which must be set in pairs, with one side being
User and the other side being Network.
echo
The echo cancellation function.
On: indicates that the echo cancellation is enabled.
Off: indicates that the echo cancellation is disabled.
hunting
Two search modes of idle timeslot:
FORWARD
BACKWARD
DS1
The interface card type: T1 or E1.
The connection state of the interface card can be: UP or DOWN
slot/ds1/ds0
One of the interfaces (represented by ds1) on a certain slot (represented by slot) into which the
T1 or E1 interface card is inserted. ds0 specifies a signaling channel. The signaling channel for
the E1 card is 16 timeslots and the signaling channel for the T1 card is 24 timeslots.
Equipped MAP
The available state of the remaining 30 timeslots on the E1 card, except timeslots 0 and 16. If
the binary value in 0xfffefffe is 1, the timeslot is available.
Free MAP
The state of an idle timeslot.
LineType
The frame format, including SF, D4, T1_UNFRAMED, SF, E1, E1_MF, E1_CRC and
E1_UNFRAMED.
