User Guide for the T21P E2 IP Phone
20
To place a call using the handset:
1.
Pick up the handset.
2.
Enter the desired number using the keypad.
3.
Press , , or the Send soft key.
The # key is configured as a send key by default. You can also set the * key as the send
key, or set neither.
To place a call using the hands-free speakerphone mode:
Do one of the following:
-
With the handset on-hook, press or the line key to obtain a dial tone.
Enter the desired number using the keypad.
Press , , or the Send soft key.
-
With the handset on-hook, enter the desired number using the keypad.
Press , , , or the Send soft key.
To place a call using the headset:
Do one of the following:
-
With the optional headset connected, press to activate the headset mode.
Press the line key to obtain a dial tone.
Enter the desired number using the keypad.
Press , , or the Send soft key.
-
With the optional headset connected, press to activate the headset mode.
Enter the desired number using the keypad.
Press , , or the Send soft key.
Note
The T21P E2 IP phone can handle multiple calls at a time. However, only one active call
(the call that has audio associated with it) can be in progress at any time, other calls
are placed on hold. The T21P E2 IP phone can handle a maximum of 50 calls at one
time.
To place multiple calls:
To permanently use the headset mode, refer to
Headset Prior
on page
Error! Bookmark
